Description
- Aluminum welded frame 6mm and 3mm thick plates
- Motor drive Basicmicro Roboclaw 2x60A, 34VDC Dual controller
- 4 motors DC 24V 300W with reduction 1/32
- 2 encoders 256 CPR (on front left and right motor)
- 2 holding brake 24VDC (on rear left and right motor)
- 4 wheels 6 inch rim and 13×5.00-6 tire with profile (with inner tube or tubeless)
- 4 wheelhubs aluminum CNC turned
- Aluminium black extruded 3030 profile for mounting external components (total length 3,5 meter)
- RC sender 10 channel type Flysky FS-i6S and receiver Flysky iA6B
- Relay 200A for switching off power to drive (safety) with 100A bypass-diode for energy recharigng to battery.
- On/off-switch 100A, battery charging-plug, 5 spare glands IP68 (1xM25, 2xM16, 1xM12), manual safety switch, DIN rail 300 mm with connectors, and 24-12 DC/DC converter, 1A fuse and 30V TVS-protection diode, wiring.
*(Batterie packages are partly connected if ordered. Only one cable per pack needs to be connected by user after transport).
AGM battery pack
- 2 x Centrac MB12-22 12V22Ah/C20 batteries – 528Wh
- Connection package with cables including fuse 40A
- Mounting package with 3D-printed mounting bracket and wingnuts
AGM battery charger
- Talamex smart charger 12V/24V 12V-10A 24V-5A, with added special connector for bigbot interfacing
LiFePO4 battery pack
- 2 x LiFePO4 12.8V 30Ah batteries – 720Wh
- Connection package with cables including fuse 25A
- Mounting package with 3D-printed mounting bracket and wingnuts
LiFePO4 battery charger
- Ouer LiFePO4 battery charger 15A, with added special connector for bigbot interfacing
Powder coating bigbot blue
- Zirconising pre-treatment (chrome-free) plus second coat 70um matt finish (color RAL5002)
Mudguards
- Two left-version 3D-printed mudguards (matt black)
- Two right-version 3D-printed mudguards (matt black)
- Mounting screws included
